Using The Function Buttons; Flash Mode Button For Setting The Flash Mode - Pentax EI-200 Operating Manual

Using the function buttons

Flash mode button for setting the flash mode

By using the flash mode button it is possible to take pictures with reduced red-eye phenomenon
when the flash is used, or to take pictures with a properly exposed background to the subject
when taking pictures at night.
1
Getting the camera ready
2
Changing the flash mode
qCheck that the battery and memory card are installed.
wTurn on the power switch and turn the mode dial to the
capture mode symbol.
qCheck the display panel.
If there is nothing being displayed on the flash setting
display area, auto (automatic flash) setting will be
performed, and the flash will fire as required.
Flash setting
display area
wPress the flash mode button once.
The red-eye reduction symbol will be displayed on the
LCD panel.
Red-eye reduction
symbol
Flash mode button
ePress flash mode button once more.
Daylight sync Mode symbol will be displayed in the
LCD panel.
Daylight sync Mode
symbol
29