Running A Script - Pentax EI-200 Operating Manual

Running A Script

Running a script saved in the memory card.
Under the Digita operating environment, a script program can be made based on Digita Script
language. It is possible to make a series of operations automatic and expand the functions by
running the script program saved in the memory card on the camera.
1
Displaying the script menus
1Install the memory card holding the script program.
2Turn on the power supply and select a mode for
operating the program by turning the mode dial.
3If the menu button is pressed, the menu screen will be
displayed.
4Press the right arrow on the four-way controller to
display the script menu.
2
Running the script
1Press the up and down arrows on the four-way
controller to display the script you wish to run in
highlighted text.
2Press the left soft key to select the soft menu [Start].
The selected script will be run.
To cancel running of the script, press the middle soft
key to select the soft menu [Stop Script].

Running A Script

131