Setting The Lcd Display; Formatting A Memory Card - Pentax K-1 Operating Manual

Setting the LCD Display

1
Use CD to select a color.
Select the display color of the
status screen, control panel, and
2
menu cursor from colors 1 to 12.
2
Press E.
The camera switches to capture mode and is ready to take
a picture.
t Memo
• You can change the language, text size, and date and time
settings from the D1 menu, and the display color from [Other
Display Settings] of the A5 menu. (p.24, p.28)
• While the GPS is on, the date and time settings are adjusted
using information obtained from satellites. (p.72)
38
1
LCD Display LCD Display
1 1
Display Color Display Color
2
1 2 5 125
1/ 1/
5.6 5.6
F F
3
Cancel Cancel OK OK
4
5
6
u Caution
• Do not remove the memory card while formatting, or the card
• Formatting deletes all data, both protected and unprotected.
t Memo
• When a memory card is formatted, the volume label "K-1" is

Formatting a Memory Card

Press F.
The A1 menu appears.
Use Q or R to display D3 menu.
Use AB to select [Format] and press D.
The [Format] screen appears.
Use AB to select the
memory card slot in which
the memory card to format
is inserted and press D.
Press A to select [Format]
and press E.
Formatting starts. When
formatting is completed, the
screen of Step 4 reappears.
Press F twice.
may be damaged.
assigned to the card. When the camera is connected to a
computer, the memory card is recognized as a removable
disk with the name "K-1".
D3
Format Format
SD1 SD1
SD2 SD2
Format Format
All data on SD1 memory All data on SD1 memory
card will be deleted card will be deleted
Format Format
Cancel Cancel
OK OK