Scanning 35Mm Slides - Microtek ScanMaker i700 Supplementary Manual

B. Scanning 35mm Slides
To scan 35mm slides, use the EZ-Lock 35mm Slide Holder which can simultaneously
hold up to 8 mounted 35mm slides at a time.
1. Flip the 35mm slides face down
2. Raise the scanner lid, then place the holder with the loaded film on the scan bed.
To make sure the auto
multiframe cropping
feature performs
correctly, align the
holder's front edges
flush against the top
ruler of the scanner.
3. Follow the procedures (steps 3 through 10) for scanning 35mm filmstrips to carry
and place them into the holder.
out scanning.
Before performing step 5, click the Scan Material icon, and choose "Positive
Film" from the Scan Material drop-down menu. For Mac OS X, select "Positive."
The calibration window on
the glass surface should be
kept clear and free from any
obstruction during scanning.
ScanMaker i700 Supplement 21