Basic Scanning - Microtek XT3500 Quick Start Manual

Basic Scanning

In this section, we will foucus on the basic scanning procedures using ScanWizard DI
software. For information about ScanPotter software and other scanning operations,
please visit the Microtek website to download the scanner user manual for reference.
1. Place the document to be scanned on the scanner's glass surface.
2. Launch ScanWizard DI as a stand-alone program by clicking on the ScanWizard DI icon
on the desktop.
3. Click the Scan Setup button in the interface to activate the Scan Setup interface.
4. In the Scan Setup interface, follow the steps below to specify your basic settings.
a) Select Flatbed in the Scan Source as your image input
device.
b) Select the appropriate image type in the Color Mode
as your image output type.
c) Select a dimension in the Paper Size as your preview
image size.
d) Select a desired resolution in the Resolution for your
image output resolution.
e) If necessary, select "Text Orientation Recognition"
in the Rotate to ensure the scanned images in a
readable orientation. When it is selected, you
can select the preferred language used as an
identification in the options menu.
f) If "Auto-crop" & "Auto-deskew" is selected, the scanner automatically detects the
size of the original image, crops the full scan frame to fit the image, and removes
unwanted black borders after the scan, as well as corrects the distorted image for
proper alignment.
4