Using Collate Mode - Kyocera FS-1018MFP Basic Operation Manual

Using Collate Mode

BASIC OPERATION GUIDE
Multiple originals can be scanned into memory in a single operation and
the required number of copy sets created.
The maximum number of originals which can be scanned depends on the
machine's available memory.
If the optional Document Processor is installed, Collate mode is selected
automatically when originals are loaded in the Document Processor.
Original
Copy
NOTE:
Continuous Scan must be On if using Collate mode. For details,
refer to Chapter 1, Advanced Operation Guide.
1
Press [Copy]. The Copy Basic screen displays.
2 Press [Function].
3
Press or to select Collate
and then press [Enter]. The
Collate screen displays.
4
Press or to select On or Off
and then press [Enter].
A Completed message displays
and the Function screen returns.
Collate: Off
Function:
Zoom
*
Combine
Collate
Collate:
Off
*
On
*
Cancel
Basic Operation
Collate: On
Exit
4-11