Kyocera FS-1018MFP Basic Operation Manual page 15

Other Precautions
BASIC OPERATION GUIDE
CAUTION:
Always remove the power plug from the outlet
when moving the machine. If the power cord is damaged, there
is a danger of fire or electrical shock.
If the machine will not be used for a short period of time
(overnight, etc.), turn the power switch off ( ). If it will not be
used for an extended period of time (vacations, etc.), remove the
power plug from the outlet for safety purposes during the time the
machine is not in use.
Always only hold the designated parts when lifting or moving the
machine.
For safety purposes, always remove the power plug from the
outlet when performing cleaning operations.
If dust accumulates within the machine, there is a danger of fire
or other trouble. It is therefore recommended that you consult
with your service representative in regard to cleaning of internal
parts. This is particularly effective if accomplished prior to
seasons of high humidity. Consult with your service
representative in regard to the cost of cleaning the internal parts of the
machine.
Do not place heavy objects on the machine or cause other damage to the
machine.
Do not open the upper front cover, turn off the power switch, or pull out the
power plug during copying.
When lifting or moving the machine, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards.
They could be damaged by static electricity.
Do not attempt to perform any operations not explained in this handbook.
CAUTION:
Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
Do not look directly at the light from the scanning lamp as it may cause your
eyes to feel tired or painful.
Legal and Safety Information
xiii