Kyocera KM-1620 Operation Manual page 88

Section 6 COPIER MANAGEMENT
2
Press either the Zoom (+) or Zoom (–) key to display "F36".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
a time interval from 1 minutes to 240 minutes.
Inch specifications
Notes
• This can be set when the Auto Off setting has been set
to "on". (Refer to P.6-29 "Auto Off Setting".)
• The time intervals that can be set are 1, 5, 15, 30, 45,
60, 90, 120, 180 and 240 minutes.
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
6-32
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Alarm
The Alarm can be set to sound when a key on the Operation Panel
is pressed or in cases when errors occur, etc.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F37".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) or Zoom (–) key and select either
"on" in the case where the alarm is to be sounded or "oFF"
when it isn't to be sounded.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications