Kyocera KM-1620 Operation Manual page 110

Section 9 MAINTENANCE AND OPERATION INFORMATION
11
Remove the Grid Cleaner and close the cap.
IMPORTANT!
After using the Grid Cleaner to clean the electrical
charge section, it can be used again after more than
5 minutes have elapsed.
12
Tap on the upper part of the new toner container 5 or 6
times.
13
Shake the new Toner Container horizontally approximately
10 times to uniformly distribute the toner in it.
14
Turn Toner Container release lever (1) to the left and
remove the Toner Container.
9-6
15
16
Return used toner containers and waste toner boxes to the
dealer you purchased them from or to a sales representative.
Recovered toner containers and waste toner boxes will be either
reused, recycled or disposed of in accordance with the law.
(1)
Install the new Waste Toner Box.
Close the front cover.
Note
In order to ensure maximum copier performance, in
addition to the cleaning done when changing the Toner
Container, regularly (about 1 time per month) carry out
Step 7 described in P.9-5 and Step 4 described in P.9-4.