Margin Shift - Kyocera KM-1620 Operation Manual

2
Press either the Zoom (+) or Zoom (–) key to display "F25".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) or Zoom (–) key and select "on"
when the reverse side is to be rotated and "oFF" when no
rotation is to be performed.
Inch specifications
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Section 6 COPIER MANAGEMENT

Margin Shift

Set the Margin Width.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F26".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and set
the Margin Width within the range from
0.13/0.25/0.38/0.50/0.63/0.75(")/1 - 18 (mm).
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
6-25