Clearing The Department Management Count - Kyocera KM-1620 Operation Manual

Section 6 COPIER MANAGEMENT
4
Input the Department Code to be deleted using the Keypad
and then press the [Enter] key.
Note
If a mistake is made during input it can be cleared by
pressing the [Stop/Clear] key and the value reentered.
5
Confirm the code to be deleted and then press the [Enter]
key.
6
Press either the Zoom (+) key or the Zoom (–) key and select
"yes". To cancel delection, select "no".
Inch specifications
7
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
6-4
Metric specifications
Metric specifications
Clearing the Department Management
Count
The Total No. of Copies Count for all sections can be cleared.
1
Display the Department Management Code.
(Refer to P.6-1 "Department Management Code
Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "d04".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press the Zoom (+) key and select "yes". To cancel the
clearing of the count, select "no".
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications