Exposure Mode - Kyocera KM-1620 Operation Manual

Exposure Mode

Sets the copy exposure at the time the copier is turned on to
Manual or Automatic.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F03".
Inch specifications
3
Press the [Enter] key.
Inch specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
either "1- (Manual)", or "2- (Automatic)".
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
Section 6 COPIER MANAGEMENT
5
Press the [Enter] key.
The display will return to that of Step 2.
Inch specifications
Eco-copy
Selects the initial value of Eco-copy when the power is turned on.
The initial value of the Eco-copy can also be set to on (Enable).
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
2
Press either the Zoom (+) or Zoom (–) key to display "F00".
Inch specifications
3
Press the [Enter] key.
Inch specifications
Metric specifications
Metric specifications
Metric specifications
Metric specifications
6-13