Setting The Merge Copy Border Lines - Kyocera KM-1620 Operation Manual

6
If there are no more originals, press either the
[Combine/Merge Copy] key or the [Enter] key.
The copier will begin copying.
4 in 1 Layout Order
Follow the procedure below to change the order in which pages are
to be laid out within the copied page when making 4 in 1 copies.
1
Depress the [Combine/Merge Copy] key for 3 seconds. The
Default Settings Mode will be displayed.
2
Confirm that the "F28 (4 in 1 layout setting)" is displayed
and then press the [Enter] key.
Inch specifications Metric specifications
Section 5 COPY FUNCTIONS
3
Press either the Zoom (+) key or the Zoom (–) key and select
the layout order from "1-" to "4-".
The order of the layouts displayed is as below.
1-:
1
2
3 4
3-: 1 2
4
3
IMPORTANT!
When the orientation is "Portrait" (vertical) select 1 or 2;
when it is "Landscape" (horizontal) select 3 or 4.
4
Press the [Enter] key.
The display will blink and copying can be begun.
Inch specifications

Setting the Merge Copy Border Lines

Use the procedure given below to change the Merge Copy Border
Lines.
1
Depress the [Combine/Merge Copy] key for 3 seconds. The
Default Settings Mode will be displayed.
2-:
1 3
2 4
4-: 3
1
4
2
Metric specifications
5-13