Greasing The Steering Head Bearing; Dismounting The Front Fender - KTM 50 SX MINI 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Greasing the steering head bearing

9.21

Dismounting the front fender

9.22
–
Position the handlebar with handlebar clamps.
–
Mount and tighten screws
Guideline
Screw, handlebar clamp
–
Position the fuel tank breather
300743-10
–
Position the brake caliper, fit and tighten the screws
Guideline
Screw, front brake caliper
300732-12
–
Position the brake line. Put the clamp on, and mount and tighten screws
–
Install the front fender. (
–
Install the start number plate. (
–
Install the front wheel.
–
Check that the wiring harness, Bowden cables and brake line have freedom of
movement and are routed correctly.
–
Check play of steering head bearing. (
300731-12
x
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
400563-01
–
Remove screws
700479-10
.

M8
.

M8
p. 31)
p. 31)
( p. 45)
x
p. 25)
( p. 28)
x
( p. 29)
x
. Remove the front fender.

20 Nm
(14.8 lbf ft)
with washers.

20 Nm Loctite ® 243™
(14.8 lbf ft)
.

30