MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the fork legs
x
9.17
–
Tighten nut
Guideline
Steering head nut
300739-10
–
Position the upper triple clamp.
–
Mount nut
Guideline
Nut, steering stem
–
Install the fork legs.
–
Tighten nut
Guideline
Nut, steering stem
300738-11
–
Position the handlebar support.
–
Mount and tighten screws
Guideline
Screw, handlebar support
300742-11
–
Position the handlebar with the handlebar clamps.
–
Mount and tighten screws
–
Position the fuel tank breather
–
Check play of steering head bearing. (
–
Check the cable harness, bowden cables and brake line for freedom of movement
and routing.
–
Remove the motorcycle from the work stand. (
300743-11
–
Remove front wheel.
–
Dismount the start number plate. (
–
Remove screws
300731-10
.
, but do not tighten it yet.
(
p. 27)
x
.
.
M10
.
.
p. 25)
x
(
p. 45)
p. 31)
and take off clamp.
M20x1.5
10 Nm (7.4 lbf ft)
M20x1.5
10 Nm (7.4 lbf ft)
M20x1.5
10 Nm (7.4 lbf ft)
40 Nm
Loctite
®
(29.5 lbf ft)
p. 20)
26
243™