Installing The Fork Legs - KTM 50 SX MINI 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the fork legs

x
9.18
–
Remove screws
–
Hang the brake caliper and the brake line loosely to the side.
300732-10
–
Loosen screw
–
Loosen screw
300733-10
–
Position the fork legs.
–
Adjust fork overhang
Guideline
Upper fork projection
300734-10
–
Tighten screw
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
300733-11
–
Position the brake caliper, fit and tighten the screws
Guideline
Screw, front brake caliper
300732-11
–
Position the brake line. Put the clamp on, and mount and tighten screws
–
Install the start number plate. (
–
Install the front wheel.
300731-11
with washers and brake caliper.

. Remove the left fork leg.

. Remove the right fork leg.

.

.

.

M8
p. 31)
x ( p. 45)
10... 17 mm (0.39... 0.67 in)
M8 25 Nm
(18.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
with washers.

20 Nm Loctite ®
(14.8 lbf ft)
27
243™
.
