Removing Main Silencer; Installing The Main Silencer - KTM 50 SX MINI 2010 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing main silencer

9.71
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.

Installing the main silencer

9.72
–
Position the vehicle as shown and secure it against rolling away. A height differ-
ence of must be reached.

Guideline
Height difference
Info
To ensure that all of the air can escape from the cooling system, the front of
A B 0 0 B 0 0 A
the vehicle must be jacked up. A poorly bled cooling system is less effective
at cooling and may result in overheating of the engine.
400677-11
–
Place the vehicle back on a level surface.
–
Add coolant to level
–
Mount the radiator cap.
–
Make a short test ride.
–
Check the coolant level. (
–
Remove screw
–
Remove screw
700512-01
–
Pull the main silencer off of the manifold at the rubber sleeve
700513-10
–
Position the main silencer.
–
Mount the main silencer with the rubber sleeve
–
Mount the silentblock with the screw
Guideline
Remaining screws, chassis
700513-01
100 cm (39.4 in)

.

p. 49)
.

.

.

M6
.

.

10 Nm (7.4 lbf ft)
51