EFFECTS SECTION
There are no controls on the ring modulator as shown by the block
diagram below. The left and right outputs are simply multiplied to-
gether to form a monophonic output.
By routing the preset (or MIDI channel) to effect B and panning to
opposite sides (shown below), two different waves can be ring modu-
lated. Ring modulation works well with simple waves such as sine
waves and the harmonic waveforms. Also, try complex waves modu-
lated with sine waves. (Play chords!) Complex waveforms tend to
sound rather noise-like.
Pan the primary and secondary instruments to left and right in the
pan screen, then move to the Effect B screen and select Ring Modula-
tor. There are no parameters to adjust in this effect so the lower line of
the display reads: None.
56
Morpheus Operation Manual
FXB:RingModulate
None
---