Proteus Sysex; Auto Select; Viewing Angle - E-Mu MORPHEUS Operation Manual

MASTER MENU
If Morpheus does not
espond to external preset
ditors, turn the Compare
unction Off.

• Proteus Sysex

When this function is On, Proteus presets can be transferred over
MIDI into Morpheus. It also allows the use of Proteus patch editing
programs. Instrument numbers and parameters which are unique to
Morpheus will, of course, NOT be transferred. This function defaults
to Off to avoid unplanned conflicts with Proteus Sysex transfers.

• Auto Select

When editing a parameter which involves the keyboard, such as a
zone range, the parameter can be automatically selected simply by
playing the keyboard. This is a handy feature for "power program-
mers", but can sometimes be confusing. Therefore, Auto-Select can be
turned On or Off. Auto-Select affects the following parameters: User
Key Tuning, Zone Select, Key Range, Midimap, Preset & Hyperpreset
Naming, Cross-switch Point, Keyboard Center.
• Compare
This function turns the Compare feature (accessed by pressing the
Preset button when editing) On or Off. If Compare is turned On,
changes made via MIDI SysEx will not be heard except when the
Preset menu is enabled.

• Viewing Angle

This function allows you to change the viewing angle of the display so
that it may be easily read from either above or below. The angle is
adjustable from +7 to -8. Positive values will make the display easier to
read when viewed from above. Negative values make the display easier
to read from below.
26 Morpheus Operation Manual
PROTEUS SYSEX
Off
AUTO-SELECT
Off
COMPARE
On
VIEWING ANGLE
+7