Table of Contents
Advertisement
BASIC OPERATION
• • If Morpheus is not
esponding properly or plays
he wrong preset, make sure
hat both Morpheus and
our MIDI controller are set
o the same MIDI channel
nd that the MIDI Volume is
urned up.
or more information about
MIDI, see MIDI Realtime
ontrols on page 97.
•• Channel Pan should
ormally be set to "P" unless
ealtime control of panning is
esired. If Pan is set to "0", a
tereo preset will play in
mono.
MIDI Activity LED
Indicates that MIDI data is being received.
MIDI CHANNEL SELECTION
Press the cursor key repeatedly until the cursor is underneath the
channel number. (The cursor is the little flashing line underneath one
of the parameters in the display.) Rotate the data entry control to
select MIDI channel 01-16. As the channel is changed, the display will
change to show the preset/hyperpreset, volume and pan associated
with the displayed channel.
PRESET/HYPERPRESET (PROGRAM) SELECTION
Press the cursor key repeatedly (or press Home/Enter) until the cursor
is underneath the program number. A Program is a Preset or a
Hyperpreset. As the data entry control is rotated, the program number
and name will change. The displayed program will be assigned to the
displayed MIDI channel. Programs are arranged into banks of 128, as
shown in the diagram at left. Banks can be selected independently of
the program number by pressing the Home/Enter button while turn-
ing the data entry knob.
C01 VOL127 PAN=P
000 Program Name
CHANNEL VOLUME
Press the cursor key repeatedly until the cursor is underneath the
volume value. Rotate the data entry control to select volume 000-127.
(This is the same parameter as MIDI volume control #7, and changes
made over MIDI will be shown in the display.)
CHANNEL PAN
Press the cursor key repeatedly until the cursor is underneath the pan
value. Rotate the data entry control to select pan values -7 to +7 or
"P". When "P" is selected, the pan value specified in the preset is
selected. Any other value will override the pan parameter in the pre-
set. (This is the same parameter as MIDI pan control #10, and changes
made over MIDI will be shown in the display.)
14
Morpheus Operation Manual
C01 VOL127 PAN=P
0
000 Preset Name
0
MIDI Channel Parameters
Preset/Hyperpreset Name
Advertisement
Table of Contents
