Footswitch Modulation; Midipatch - E-Mu MORPHEUS Operation Manual

PRESET PROGRAMMING

• FOOTSWITCH MODULATION

Changes a parameter when one of the three footswitches are pressed.
The footswitches can be programmed to switch: Sustain (pri/sec/both),
Alternate Volume Envelope (pri/sec/both), Alternate Volume Release
(pri/sec/both), Cross-Switch between the primary and secondary
instruments, or Portamento On or Off (pri/sec/both).
In addition, the footswitches can be used to execute conditional
jumps in any of the function generators.

MIDIPATCH

Connecting a modulation Source to a Destination is called a Patch.
Morpheus lets you connect the modulation sources in almost any
possible way to the modulation destinations. You can even modulate
other modulators. Each patch also has an amount parameter which
determines "how much" modulation is applied to the destination. The
modulation amount can be positive or negative and will either add or
subtract from the initial value.
In order to create a modulation patch, you must connect a modula-
tion Source to a modulation Destination using either the Note-On
Control, Realtime Control, or Footswitch Control screens. Think of it
like connecting a cord. You must connect both ends of the cord for
the cord to work. There are 10 Note-On connections and 10 Realtime
connections per preset.
Modulation
Source
LFO 1
Sources
LFO 1
LFO 2
Aux Env
Wheel
Pressure
MIDI
etc.
72 Morpheus Operation Manual
Amount +/-
- +
Destination
Primary
Volume
Destinations
Pitch
X-Fade
Volume
LFO Amt.
Filter Fc
Attack
etc.