E-Mu MORPHEUS Operation Manual page 92

When Presets are Selected,
the Free-Run
Function Generator has No Effect
Preset 1 Preset 2
Morph
Free-Run
FG
Free-Run
FG
Hyperpreset
The Free-Run Function Generator only works in a Hyperpreset, even though the
modulation routing is made in the preset.
The Free-Run FG begins the instant the Hyperpreset is selected and
continues to run until stopped by its programming or when another
Hyperpreset is selected. If the Free-Run FG is not programmed
to loop, it simply runs to the last segment and stops! Because
it continually runs (if so programmed) and is not started at the begin-
ning of a note like the preset function generators, it is called "free-
running".
The functions of the Free-Run FG are almost identical to the preset
FG's except that the conditional jumps are more limited. The condi-
tional jumps are listed below.
Never
............................. Never jumps. Always goes on to next segment.
Always End ................
Note On End
................ Jumps at the end of the segment if the note is still
Note On Imm
. ............. Jumps immediately if the note is still on.
Note Off End
............... Jumps at the end of the segment if the note is off.
Note Off Imm.
............ Jumps immediately if the note is off.
Footsw. 1-3 End
.......... Jumps at the end of the segment if the selected
Footsw. 1-3 Imm.
....... Jumps immediately if the selected Footswitch is
Function Generator ONLY works
Volume
Free-Run
FG
Always jumps at the end of the current segment.
on.
Footswitch is pressed.
pressed.
The Free-Run
in a Hyperpreset.
Hyperpreset
Preset 1 Preset 2
Morph Volume
Free-Run Free-Run
FG FG
Free-Run
FG
Chapter 7: Preset Programming
PRESET PROGRAMMING
83