Footswitch Control; Pitch Bend Range; Pressure Amount; Midi Controller Amount - E-Mu MORPHEUS Operation Manual

PRESET MENU
Pressure Amount and
Controller A-B-C-D Amount
are MASTER Controls which
affect the amount of modula-
tion which can be
programmed in the Realtime
Modulation section.
In order for the Realtime
Modulation Control amounts
for these functions to have a
full range of control, the
Pressure and Controller A-D
amounts must be set to
+127.

• Footswitch Control

This function allows you to route the 3 footswitch controllers (1, 2 or 3)
to any of the footswitch destinations. The footswitches can be routed to
switch: Sustain (pri/sec/both), alternate volume envelope (pri/sec/both),
alternate volume release (pri/sec/both), cross-switch between the pri-
mary and secondary instruments or switch portamento Off or On (pri/
sec/both).

• Pitch Bend Range

This function allows you to specify the pitch wheel range for the cur-
rent preset if pitch bend is not being globally controlled in the Master
menu. Pitch bend range is only used when the pitch wheel is used to
control pitch.

• Pressure Amount

This function allows you to specify an overall amount parameter for
mono or poly keyboard pressure data (pre-patch cord). The pressure
amount is variable from -128 to +127.

• MIDI Controller Amount

This function allows you to specify an overall amount parameter (pre-
patch cord) which variable from -128 to +127 for each of the MIDI
controllers.
CONTROLLER AMT
A:+127
124 Morpheus Operation Manual
FOOTSWITCH CTRL
1 -> Sustain
PITCH BEND RANGE
+- 12 semitones
PRESSURE AMOUNT
+127
CONTROLLER AMT
B:+127 C:+127 D:+127