E-Mu MORPHEUS Operation Manual page 241

Offset Name
233 (L) Double+Detune 0-15, 0 = Off
234 (L) Sound Reverse
235 (L) Nontranspose
236 (L) Filt Type
237 (L) Filt Reverse
238 (L) Filt Level
239 (L) Filt Morph
240 (L) Filt FrqTrk
241 (L) Filt Trans2
242 (L) Unused
(L) = Layer ...
cs
F7
• Hyperpreset Request
Request Hyper uses index values (not the same as program numbers).
Request for RAM Card presets will be ignored if card is not present.
Hyperpreset numbers are: 0-127 RAM, 128-255 CARD. Values 0x0400
+ bank # represent request for banks. (Banks are blocks of 128 Hypers.)
F0 SysEx Status Byte
18 E-mu Mfg ID
0C Morpheus Product ID
dd Device ID 0-15
44 Command ID
ll Hyperpreset Number ls byte
mm Hyperpreset Number ms byte
F7 End of SysEx Status
• Hyperpreset Data
Version 0x01 format is as follows:
F0
18
0C
dd
45
vv
ll
mm
Range
0-1, Off, On
0-1, Off, On
See FILTER TYPES
0-1, Off, On
0-255
0-255
0-255
0-255
0
2 layers (35 parms each)
Checksum
End of SysEx Status
SysEx Status Byte
E-mu Mfg. ID
Morpheus Product ID
Device ID 0-15
Command ID
Data Version
ls Byte Hyperpreset Number
ms Byte Hyperpreset Number
Chapter 11: Reference Section
MIDI SPECIFICATION
••• The Parameters labeled
with (L) are the primary
layer. The secondary layer
parameters bigin at number
243.
231