Radio Setup; Display - Standard Horizon HX851 Owner's Manual

8 RADIO SETUP

The HX851's "Radio Setup" mode allows a number of the HX851 operating
parameters to be custom-configured for your operating requirements.

8.1 DISPLAY

Allows setting up the HX851 display mode. The default setting is "Position".
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ CALL ( ENT ) MENU ] key, then select "Display"
in the "Radio Setup" menu with the [ ] / [ ] key.
3. Press the [ CALL ( ENT ) MENU ] key.
4. Press the [ ] / [ ] key to select the desired mode.
Radio:
Position:
Navigation: Displays your position, SOG (Speed Over
Compass:
Waypoint:
GPS Status: Displays apparent reception of GPS satellites, including the
5. Press the [ CALL ( ENT ) MENU ] key to store the selected display and return
to radio operation mode.
When the "GPS Status" mode is selected in step "4" above, the display
will show the "GPS Status" page until pressing any key.
"R " M
Page 64
Displays the "
Displays your position and current time
on the display.
Ground: your current speed), COG
(Course Over Ground: your current direc-
tion), and current time on the display.
Displays your SOG (Speed Over Ground: your current speed),
COG (Course Over Ground: your current direction) by the
Rose Compass.
Displays the distance and direction of the received vessel, and
also the compass indicates the received vessel by dot ( ) .
bar-graph of signal strengths.
"P " M
"W " M
" icon only.
NOTE
"N
"GPS S
" M "C
" M
" M
HX851