Editing A Waypoint - Standard Horizon HX851 Owner's Manual

16. Repeat step 14 and 15 until the Latitude is shown in-
clude E or W in the last digit.
17. If a mistake was made entering in the MMSI number
repeat pressing the [ H/L (
ber is selected, then press the [ ] / [ ] key to correct the entry.
18. After all information is entered, press and hold the [ CALL ( ENT ) MENU ]
key to store the waypoint into memory.

12.2 EDITING A WAYPOINT

This function allows a previously entered waypoint to be edited.
1. Press and hold down the [ CALL ( ENT ) MENU ]
key until "Setup Menu" appears.
2. Press the [
menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Waypoint Directory" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Select "Edit" with the [ ] / [ ] key, then press
the [ CALL ( ENT ) MENU ] key.
6. Show the waypoint Input display.
7. Press the [ CALL ( ENT ) MENU ] key repeatedly
until the number or letter is selected that is to be
changed.
8. Press the [ ] / [ ] key to change the letter or
number.
9. Repeat step 7 and 8 until the waypoint is updated.
10. Press and hold the [ CALL ( ENT ) MENU ] key to store
the edited waypoint into memory.
Page 82
)] key until the wrong num-
] key to select "Waypoint Setup"
HX851