Standard Horizon HX851 Owner's Manual page 43

key. Repeat this procedure until all nine space of the
MMSI number are entered.
11. If a mistake was made entering in the MMSI number
repeat pressing the [ H/L (
ber is selected, then press the [ ] / [ ] key to correct
the entry.
12. To store the data entered, press and hold the
[ CALL ( ENT ) MENU ] key.
13. To enter another individual address, repeat steps 5 through 12.
14. Press the [ CLR ( WX )] key twice to return to the "Setup Menu", then press
the [ CLR ( WX )] key again to return to radio operation.
7.5.2 SETTING UP INDIVIDUAL REPLY
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual Call requesting you to switch to a working channel
for voice communications. When "Manual" is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold the [ CALL ( ENT ) MENU ] key until "Setup
Menu" appears.
2. Press the [ ] key to select "DSC Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select "Indi-
vidual Reply" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "Automatic" or "Manual".
6. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
7. Press the [ CLR ( WX )] key twice to return to radio op-
eration.
HX851
)] key until the wrong num-
Page 43