Standard Horizon HX851 Owner's Manual page 50

6. Press the [ ] / [ ] key to scroll through the first
letter of the name of the group you want to refer-
ence in the directory.
7. Press the [ CALL ( ENT ) MENU ] key to store the
first letter in the name.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven charac-
ters, if you do not use all eleven characters press
the [ CALL ( ENT ) MENU ] key to move to the next
space. This method can also be used to enter a blank
space in the name. If a mistake was made entering in
the name repeatedly press the [ H/L (
selected, then press the [ ] / [ ] key to correct the entry.
9. After the eleventh letter or space has been entered,
press and hold the [ CALL ( ENT ) MENU ] key to advance
to the GROUP MMSI (Maritime Mobile Service Identity
Number) number entry.
10. Press the [ ] / [ ] key to scroll through numbers, 0-9.
To enter the desired number and move one space to
the right press the [ CALL ( ENT ) MENU ] key. Repeat this
procedure until all nine space of the MMSI number are
entered.
11. If a mistake was made entering in the MMSI number repeatedly press the
[ H/L ( )] key until the wrong number is selected, then press the [ ] / [ ]
key to correct the entry.
12. To store the data entered, press and hold the [ CALL ( ENT ) MENU ] key.
13. To enter another Group Address, repeat steps 5 through 12.
14. Press the [ CLR ( WX )] key twice to return to the "Setup Menu", then press
the [ CLR ( WX )] key again to return to radio operation.
7.7.2 SETTING UP THE GROUP CALL RINGER
The HX851 has the capability to turn off the Group Call ringer.
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "DSC Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"DSC Beep" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "Group", then
press the [ CALL ( ENT ) MENU ] key.
Page 50
)] key until the wrong character is
HX851