Preset Channels 0 ~ 9 : Instant Access - Standard Horizon HX851 Owner's Manual

6.11 PRESET CHANNELS 0 ~ 9 : INSTANT ACCESS

10 Preset Channels can be programmed for instant access. Pressing the [ PRE-
SET ] key activates the user assigned channel bank. If the [ PRESET ] key is
pressed and no channels have been assigned, an alert beep will be emitted
from the speaker.
6.11.1 PROGRAMMING
1. Press the [ ] / [ ] key to select a channel to be
programmed.
2. Press and hold the [ PRESET ] key until the pre-
set channel number "
icon are displayed.
3. Release the [ PRESET ] key. The preset channel num-
ber "
4. Repeat steps 2 and 3 to program the desired channels into the PRESET
memory.
5. To delete a Preset Channel: press the [ PRESET ] key numerous times until
the channel the preset channel you want to delete is shown on the display.
Press and hold the [ PRESET ] key until "
display.
6.11.2 OPERATION
Pressing the [ PRESET ] key will toggle between Preset
Channels "0" through "9" and the last selected "regular"
channel. The Preset Channel number will disappear after
five seconds.
Page 32
" will disappear from the display after a few second.
" and a " "
" icon is removed from the
HX851