1C 6Kp4-Flstfx, "Twist Lock" Module - GarrettCom Magnum 6K32T Installation And User Manual

Magnum 6K32 & 6K32T Managed Switch
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.1c 6KP4-FLSTFX, 2@10Mb and 2@100Mb multi-mode FX-ST "twist
lock" Module
The Magnum 6KP4-
FLSTFX is a combo fiber
module with two 10Mb +
two 100Mb multi-mode
fiber module and in
combine 4 ST-Fiber ports.
All four fiber ports are ST
connectors and configured
as 10Mb Half-duplex by
default for 10Mb fiber and
100Mb Full duplex for the
100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb
network to the Magnum 6K32T switch. They also provide a convenient way for the half
duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST
module allow to connect the 100Mb demand of Switch devices. It supports distances
according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-
mode for 10Km distance may be available as a special order).
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
www GarrettCom com . .
Each port has an Activity (ACT) LED indicating packets being
3
Each port has an Activity (ACT) LED indicating packets being
Installation and User Guide (12/05)
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2
ACT ACT
F/H F/H
TX LK RX
1
ACT
ACT
F/H
F/H
2 TX LK RX
1
LINK
3
FULL/HALF
44
TX LK RX
5
6 T LK RX
2 ACTIVITY
1