GarrettCom Magnum 6K32T Installation And User Manual page 9

Magnum 6K32 & 6K32T Managed Switch
For (Optional) DC internal power supplies at –48VDC, 24VDC and 125VDC,
including Dual Source options (
input sources are interrupted)
Relay Alarm Contact (Optional)
The Alarm Contact option is offered as a configuration option. The alarms can be
initiated through two normally closed Form-C contacts, one loss of power alarm
and one software alarm through user selectable software traps.
Per-port MDI or MDIX on RJ-45
The copper daughter board has MDI-MDIX Auto-crossover on all the RJ-45
ports., and eliminate the use of cross-over cable between the devices. Also
port-specific user settings (such as FDX or HDX, copper 10/100 speed) can
be fixed using software commands.
Agency Approvals
UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15 Class A
NEBS L3 and ETSI Compliant for Carrier Central Offices
IEEE P1613 Environmental Standard for Electric Power Substations.
IEC61850 EMC and Operating Conditions Class C for Power Substations
Warranty: Three years, return to factory
For a Configuration Guide, see the GarrettCom web site at
http://www.garrettcom.com/techsupport/insertion_guides/6K32Tcg.pdf
mktg@GarrettCom.com
Email
www GarrettCom com . .
for continuity of operation when either of the DC
, see Appendices B and C.
for additional details.
3
Installation and User Guide (12/05)
Made in USA