Specifications - Strong SRT 5001 User Manual

Digital terrestrial receiver
Table of Contents

Advertisement

A.2 SPECIFICATIONS
Demodulator
Demodulator: COFDM;
16-QAM/64-QAM
Transmission mode: 2K, 8K
Video Decoder
Profile level: MPEG-2 MP@ML
Video resolution: 720 x 576 pixels
(PAL), 720 x 480 (NTSC)
Decoding & Video Out: PAL & NTSC
Aspect ratio: 4:3, 16:9
Audio Decoder
MPEG MusiCam Layer II
Sampling rate: 32, 44.1, 48 KHz
Audio mode: Stereo, Joint Stereo,
Dual Mono, Mono
Tuner
Front End: DVB-T, UHF & VHF Tuner
Input frequency range: 174 – 230 MHz
(VHF) and 470 - 862 MHz (UHF)
Loop through frequency range:
47 ~ 862 MHz
Input signal level: -82 ~ -20 dBm
Multimedia
Video playback – MPEG-1 and
MPEG-2 encoded (mpg)
Audio playback – MP3 and WMA
Picture view – JPEG format
Subject to alterations. In consequence of continuous research and development
technical specifications, design and appearance of products may change. All
product names are trademarks or registered trademarks of their respective owners.
© STRONG 2009. All rights reserved. 04/2009
16
Memory and System
Flash memory: 1 MByte
SDRAM: 8 MBytes
Connectors
ANT IN - IEC Female
TO TV - IEC Male
TV SCART (RGB, CVBS)
S/PDIF: coaxial output
USB 1.1 port
General Data
Supply Voltage :220 - 240 V AC
(SMPS), 50/60 Hz
Power Consumption: 4.5 W (typical);
8 W (max)
Power consumption in Standby: 3.4 W
Operating Temperature: 0°~ +40 °C
Storage Temperature: -30°~ +80 °C
Operating Humidity Range: 10 ~ 85 %,
RH, Non-condensing
Net-weight: 0.5 kg
Size (W x D x H) in mm: 180 x 135 x 43
PART 1 • English

Advertisement

Table of Contents
loading

Table of Contents