Strong SRT 5001 User Manual page 14

PART 1 • English
5.3.1 OSD Language
This menu allows you to set OSD Language.
5.3.2 TV System
This menu allows to setup different settings concerning your TV set.
Display Mode:
Aspect Ratio:
Video Output:
5.3.3 Region and Time
Here you can set your region and time zone.
Region:
GMT Usage:
GMT Offset:
Date/Time:
Time Display:
5.3.4 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number:
Timer Mode:
Timer Service:
Wake-up Channel: You can select a desired channel as wake-up channel.
Month/Date/Day: Press pq buttons to select your desired month, date and day.
Time:
When you want to quit programme timer, a saving window appears, with tu
select Yes in the confirmation window and press OK to save or select No to cancel.
Duration:
PAL/NTSC/AUTO
Use this menu to configure the screen aspect between: 4:3 PS
(Pan&Scan), 4:3 LB (Letter Box) and 16:9 (Wide Screen)
Use this menu to switch the video output mode either to RGB
or to CVBS
This menu is used for changing the region setting.
This menu is used for usage of GMT.
The options are: Off / User Define / By Region
This menu is valid only when selected "User Define" in GMT
Usage menu. The GMT offset range is "-11:30 ~ +12:00",
increasing by half hours progressively.
"Date" and "Time" menus are valid only when selected "Off" in
GMT Usage menu. Press OK then numeric button to change
the date and time.
This menu allow to control whether the time is displayed on
screen or not. The options are: Off/On.
You can set 8 timers
Off/Once/Daily/Weekly/Monthly
TV Service/Radio Service
Press OK to input the time with the numeric buttons.
Press OK to input desired duration with the numeric buttons.
11