Table of Contents
Advertisement
record using the
information will be displyed in the timer menu. Scroll down to MODE and select RECORD,
then press the OK button to confirm and EXIT to return to live viewing. The receiver is now
set to record this program. Please note that if you are watching another channel at this
time the receiver will automatically change to the channel set for the recording.
•
During recording, EPG; SUB; Multi AUDIO functions can not be operated.
•
Recorded TV programs will not support EPG: SUB: Multi AUDIO.
Selecting a Partition and Partitioning your USB HDD:
How do I choose and set different partitions from my HDD ?
Usually there are several partitions available in HDD's, and our STB can allow you to choose
different partitions for recording purposes, choose from DVR partition menu, menu of Device
List will popup, it lists all partitions your HDD has, choose the one you want, and press the OK
button to save. Then the recorded video file will be stored into this partition. The recorded file
will be saved in the DVRRECORD folder.
WARNING
Using USB1.1 or USB2.0 Key or Stick (Including MP3 player)
1) We strongly suggest not to record any TV program by USB Key or Stick. Due to the large variety
of USB Key's or Stick's being available in the market with different quality levels, we cannot
guarantee any damage of your USB Key or Stick will occur from attempting to record on to it.
2) Do not remove your USB device from the STB while it is in use during any USB multimedia function.
Electronic Program Guide (EPG)
Some providers broadcast information about their programs. This information is available on screen
via an electronic program guide, displayed by pressing GUIDE on the remote control. An example
is shown below.
You can navigate through the EPG looking for information about channels and programs
(explained in the next section) or press EPG or EXIT to close the guide.
then press the Reserve/Rec GREEN button. The program
press
or
24
Advertisement
Table of Contents
