Assembly; Assembly Conveyor Cart & Guide A Cut - Norton BBL547 Owner's Manual

I. PREPARATION
B. Assembly
1. Remove machine from skid.
2. Remove the conveyor cart and guide-a-cut from the carton and place on the
pan.
3. Remove the drain plug from carton and place in drain opening in bottom of
pan.
4. Check the owner's manual for wiring connection and proper electrical
connections before starting saw.
C. Assembly Conveyor Cart & Guide-a-Cut
The Block Buster Masonry saws are shipped completely assembled and ready
for use except for diamond blade, gasoline, and oil. Inspect the saw for
shipping damage. If any damage is found, contact the shipper immediately
and file a freight claim.
responsible for any freight-related damages.
the pallet.
Items Included with the saw:
Item
Conveyor Cart Assembly
Guide-A-Cut Assembly
Splash Guard Assembly
Wrench 19 mm
Wrench 22mm
Water Pump Assembly
Pump Water Electric
Fit Barb Hose 1/4FPTX1/2
Owner's Manual
Diamond Bade
Do not install the blade until it is time to use the saw!
ANSI regulations prohibit the transportation of any concrete saw with
the blade installed!
Norton Construction Products is not
Part No UPC
83777 00310007390
83892 00310007501
75128 00310004632
70807 00310004053
72143 00310004199
72305 00310004237
214169 70184668392
9602010 70184650470
Form BBL527-
1327 -NA-
6
Remove the saw from
QTY Notes
1
1
1
1
1
1 Gasoline Powered Machines Only
1 Electric Powered Machines Only
1 Electric Powered Machines Only
1 Form BBL527-1327 Manual Rev 4-
2012
1 General Propose Same Diameter as
Blade Size