Iv. Parts List; A. Ordering Information; B. Electric Motor And Gasoline Engine Service Information - Norton BBL547 Owner's Manual

IV. PARTS LIST

A. Ordering Information

1. Provide the model number and serial number of the machine from the machine
name plate.
2. Provide the UPC number, part number, and description of part.
3. Whenever alternate parts are shown due to product improvement, inspect the
part you have and provide additional description as necessary.
4. Specify mode of shipping desired, for example, parcel post, truck, air freight,
UPS., best way, etc.
Contact Customer Service:
Saint-Gobain Abrasives
2770 West Washington
Stephenville, TX 76401
Phone: 254-918-2310
Fax: 254-918-2312
Web: www.nortonconstructionproducts.com
NOTE: All Parts Are Sold As Individual (each) Unless Noted Otherwise
Blades Use Only Clipper Diamond Blades. Contact your local Norton
Clipper Distributor or our Customer Service at 254-918-2310 for the best blade for
the application.
All parts are designated as either Service Parts (S) or Wear Parts (W) in the
Type column in the parts listing. Wear parts are worn out through normal use of
the machine. The wear period depends on the intensity of use of the machine,
handling, and maintenance of the machine. Wear parts must be serviced and
eventually changed following the indications of the manufacturer. Any wear due to
normal use of the machine will not be considered as a case of warranty for items
designated as Wear Parts (W). For best performance and life Genuine Norton
Clipper replacement parts should always be used. Changes to part specifications,
are subject to change with out notice.

B. Electric Motor and Gasoline Engine Service Information

Repair or replacement service is available from your nearest authorized service
center. Refer to the service center listing for the nearest authorized
motor/engine service center.
24