Assembly - Norton Clipper Blockbuster BBC347 Owner's Manual

I. PREPARATION
B. Assembly
The compact Masonry saws are shipped completely assembled and ready for use except
for diamond blade, gasoline, oil, and Head Locking Bar. Inspect the saw for shipping
damage. If any damage is found, contact the shipper immediately and file a freight claim.
The Norton Company is not responsible for any freight-related damages.
Remove the saw from the pallet.
Items Included with the saw:
UPC Part Number
00310006528
00310002135
00310007367
00310007501
00310004633
00310004053
00310004199
00310004237
70184668392
70184650470
Head Locking Handle:
Remove the Head Locking Screw from the machine (see Figure: Head Locking Screw
Removal). Replace the Head Locking Screw with the Head Locking Handle located in the
plastic bag of accessories (see Figure: Head Locking Handle Installation). Read and
understand the remaining sections of this Owners Manual.
The Head Locking Handle is used to lock the cutting head at a set position or depth of cut.
The Head Locking Screw is only used to hold the Cutting Head of the machine in place at
the Norton Company Factory.
Do not install the blade until it is time to use the saw!
ANSI regulations prohibit the transportation of any concrete
saw with the blade installed!
82738
75817 Leg Kit (Contains Legs and Cap) Set of Four (4)
83754
83892
75132
70807
72143
72305
214169
9602010
Item
Head Locking Handle With Stud
Conveyor Cart Assembly
Guide-A-Cut Assembly
Water Curtain Assembly
Wrench 19 mm
Wrench 22mm
Water Pump Assembly
(Gasoline Powered Machines Only)
Water Pump PE-1
Fitting Barb Hose ¼" FPT X ½ Male Barb
(Electric Models Only)
7
QTY
1
1
1
1
1
1
1
1
1