Navigating The Osd; Selecting A Computer; The Osd Settings (F2) - Tripp Lite 116 User Manual

Port number
appears here
Instruction
keys

4.2.1 Navigating the OSD

To navigate up and down use the Up and Down arrow keys.
To jump from one column to the next (when relevant) use the Tab key.
To exit the OSD or return to a previous window within the OSD press Esc.

4.2.2 Selecting a computer

To select a computer:
1. Navigate to the desired computer line.
Or, type the port number of the desired computer.
2. Press Enter. The selected computer is accessed. A confirmation label appears
showing which computer is accessed.
Note! When the OSD is displayed you cannot select computers using the front panel
Select buttons or the keyboard hotkeys.

4.2.3 The OSD settings (F2)

Press F2. The OSD Settings window appears see Figure 14.
SMART CAT5 SWITCH – 108/116
Figure 13 OSD Main window
15
C=Computer