3 . Conducting a Remote Session
A remote session allows accounts IP access to computer/servers and serial devices connected to the KVM. In a remote session, accounts
can access computers/servers, power cycle or turn power to a Target Server Off/On, virtually mount an .iso file, and configure the remote
session settings. The sections that follow explain the features of a remote session, and how to use them.
3 .1 Starting a Remote Session
To start a remote session:
1.
Open the Web Configuration Interface, and click on the
only those ports that the logged-in account is permitted to use. For administrator accounts, a graphic of the KVM's back panel is
displayed in between the Toolbar and Data Pane.
2.
A remote session can be initiated in one of four ways:
• Select a port from the Data Pane of the My Targets screen, and click on the Display icon in the toolbar.
• Select a port from the Data Pane of the My Targets screen, and press the [Enter] key.
• Double-click on a port in the Data Pane of the My Targets screen.
• Administrator's Only – Double-click on a port in the graphic of the KVM's rear panel.
Note: A Target Server with a Remote Exclusive Session or Local Exclusive Session status is being accessed by another account in Exclusive Mode (see
section 3.4 Exclusive Session for details), and cannot be accessed. A Target Server with a Remote Session status is being accessed by another account
in Share Mode, which allows for up to 5 users to access the port at the same time (see section 3.3 Shared Session for details).
3.
Upon initiating a remote session in one of these four ways, the screen of the selected Target Server appears inside a remote console
window with the remote session toolbar displayed.
icon in the menu bar. The My Targets screen appears, displaying
42