Table of Contents
Advertisement
2 . Web Configuration Interface
2 .4 .10 Serial Ports
The Serial Ports page is where you configure the settings of the serial device(s) that you have connected to the KVM. (See the Serial Pinout
section in this manual for the pinout information.)
To configure the serial port settings:
1.
From the Configuration section, select the Serial Ports tab. The Serial Ports page appears.
2.
For each serial device connected, enter an appropriate Device Name, and then set the Baud Rate, Parity, Data Bits and Stop Bits
settings accordingly.
3.
Click the Save button at the top of the screen to save your changes.
2 .4 .11 Security
The Security section allows you to configure the security features of the KVM, such as Account Blocking, Password Policy, Idle Timeout, and
Serial Terminal Policy.
To configure the security settings:
1.
From the Configuration section, select the Security tab. The Security page appears.
14-03-051 93-32D5.indd 28
28
3/14/2014 9:52:31 AM
Advertisement
Table of Contents
