Table of Contents
Advertisement
[On Screen Display] Settings
Sets a display item on the viewer screen.
For the Built-in Viewer, characters are displayed as
overlay on the video image.
This page can be used during access using
"admin" or "operator".
When the Control Menu is open, click [Viewer
0
Setup] to switch to the Viewer Setup Menu.
Click [On Screen Display] to open the Settings
0
screen.
When you click the [Apply] button, the current
0
settings are made valid on the viewer and they
are stored in the computer.
On Screen Display
.
[Viewer Setup] - [On Screen Display] Settings
62
Camera ID
When "ON" is selected, the [Camera ID] is
displayed at the top of the screen.
You can set the [Camera ID] from the camera's
[Basic Setting2] or [Camera] Page.
(A P31 [[Basic Setting2] Page] )
(A P33 [[Camera] Page] )
[Set values: ON, OFF]
Position Title
When "ON" is selected, the position title is
displayed in the lower left of the screen.
[Set values: ON, OFF]
Time
Set to "ON" to display the time.
The time is displayed at the right bottom position of
the screen.
The clock time contained in the JPEG data or
stream data is displayed.
* Stream data: Stream data encoded with H.264
Baseline or H.264 High.
[Set values: ON, OFF]
Format
Selects a time display format. YYYY, MM and DD
denote the year, month and days. HH, MM and SS
are hours, minutes and seconds. mm is 1/100
seconds.
[Set values: YYYY/MM/DD HH:MM:SS.mm,
YYYY/MM/DD HH:MM:SS, DD/MM/YYYY
HH:MM:SS, MM/DD/YYYY HH:MM:SS, MM/DD
HH:MM:SS, HH:MM:SS, HH:MM]
Advertisement
Table of Contents
