ALC SETTINGS Screen
Adjusts video signal brightness level. The larger the value, dark area becomes
more visible. The smaller the value, bright area becomes more visible.
[Setting values : -5 to NORMAL to 5] (Default value: NORMAL)
Press the [SET] button to display the fixed photometry area. Select one of the
following four types.
[Setting values : AREA1 to AREA4] (Default value: AREA1)
Memo When the BLC (backlight compensation) selector switch is set to "OFF",
[BLC AREA] does not work even if it is set.
Sets the exposure detection method to the ratio of the AVERAGE value and
[Setting values : 10:0, 9:1, 8:2, 7:3, 6:4, 5:5] (Default value: 8:2)
10:0 : When the screen, other than the highlighted section, becomes dark,
increase the AVERAGE value like in the example.
: When halation occurs on the highlighted section of the screen, increase the
PEAK value like in the example.
Sets whether to prioritize motion or picture quality when the subject becomes
[Setting values : MOTION, COMBO, PICTURE] (Default value: MOTION)