Table of Contents
Advertisement
Protocol Page
This page is for changing the HTTP server port number, VSIP server status, and VSIP server port
number.
This page can be used during access using admin .
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.
A
HTTP Server
Port
B
VSIP Protocol
C
VSIP Server Port
:
Memo
● If Built-in Viewer is used for playback, change the [HTTP Port] number in the setting screen of Built-in
Viewer to the same value. (A Page 97)(A Page 102)
You can change the port number for Built-in web server of VN-V686WPU. (1-
65535)
The default port number setting is 80 . The port number of JPEG/MPEG4
server is changed also.
To access to VN-V686WPU from the Internet Explorer, enter the following in
the Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to 8080 , for example, enter the Internet
Explorer as follows.
http://192.168.0.2:8080
You can change the On/Off setting of VSIP Protocol. To use this unit from
Nextiva of Verint Systems Inc., select On .
You can change the port number for Built-in VSIP server of VN-V686WPU.
(1-65535)
The default port number setting is 5510 .
A
B
C
Advertisement
Table of Contents
