Protocol Page - JVC VN-V686U Instructions Manual

Protocol Page

This page is for changing the HTTP server port number.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.
A
HTTP Server
Port
:
Memo
● If
Built-in viewer is used for playback, change the [HTTP Port] number in the setting screen of
in viewer to the same value. (A Page 97)(A Page 102)
You can change the port number for the built-in web server of VN-V686U. (1-
65535)
The default port number setting is A80B. The port number of JPEG/MPEG4
server is changed also.
To access to VN-V686U from the Internet Explorer, enter the following in the
Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to A8080B, for example, enter the Internet Explorer
as follows.
http://192.168.0.2:8080
A
Built-
69