Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Figure #6
AC Power Connections
1.
Connect each AC power strip cord to the local AC power source.
Recommend that each AC power strip be on a separate circuit.
n
2.
Connect the NAS 6000 Expansion Unit enclosure to the user-supplied AC power
strips.
3.
Install two AC power cords in each enclosure shelf.
4.
Route the left side cords to the left side AC power strip.
5.
Route the right side cords to the right side AC power strip.
6.
Make sure all the power supply back panel ON/OFF rocker switches are in the OFF
or "O" position.
There are two back panel switches on each enclosure shelf.
n
Chapter #1 - Installation - Rack Mounting Your NAS 6000
11/07/01 -- Revision 2.0.03A
NAS 6000 Network Interface Card Connector Options
Chapter #1 - Installation - Rack Mounting Your NAS 6000
1: User-Supplied Materials and Services
11
000001628
Advertisement
Table of Contents
