Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
To enable the guest account
1.
On the primary navigation bar, choose Users.
2.
Choose Local Users.
3.
In the Name column, select Guest.
4.
In the Tasks list, choose Properties.
5.
On the General tab, clear the Disable this user account check box.
6.
Choose OK.
Removing a User Account
With the exception of the last remaining account and your personal account, you can
remove all user accounts that you have created on the Microsoft Windows Powered
appliance. In addition, you can remove multiple user accounts at once. However, if you
remove the only user account on the server appliance, security is disabled.
When removing user accounts, keep the following guidelines in mind:
Built-in users cannot be deleted.
n
A deleted user cannot be recovered.
n
If you delete a user account and then create another user account with the same user name,
you must set new permissions for the new user; the new user will not inherit the
permissions that were granted to the old user.
To remove user accounts
1.
On the primary navigation bar, choose Users.
2.
Choose Local Users.
3.
Select the user account(s) you want to remove.
4.
In the Tasks list, choose Delete.
5.
Verify you want to delete the indicated user account(s), and then choose OK.
Chapter #9 - O/S 2.0 - Users and Groups
11/07/01 -- Revision 2.0.03A
Related Topics
•
Adding a User Account
225
Chapter #9 - O/S 2.0 - Users and Groups
Manage Local Users
000001628
Advertisement
Table of Contents
