MaxAttach NAS 6000 Administration Guide
NFS Sharing Protocol
Setting NFS Sharing Protocol
You can use the NFS Protocol option to configure the MaxAttach NAS 6000 to act as an
NFS server. The NFS Protocol allows users to share files in a mixed environment of
computers, operating systems, and networks.
You can use the NFS Protocol to manage NFS Client Groups, NFS Locking, and
NFS User and Group mappings. NFS Shares, however, are created from the Shares
section of the Web UI.
From the NFS Client Group page, you can create, delete, or edit NFS client groups.
To configure the NFS protocol
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select NFS Protocol, and then choose Properties.
4.
Select the NFS configuration task you want.
Adding NFS Client Groups
To add an NFS client group
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select NFS Protocol, and then choose Properties.
4.
Choose Client Groups.
5.
In the Tasks list, choose New.
6.
On the New NFS Client Group page, type the group name you want to add in the
Group name box.
7.
In the Client name or IP address box, type the computer name or IP address you
want to add to the group.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Chapter #8 - O/S 2.0 - Folders and Shares
207
NFS Sharing Protocol
000001628