MaxAttach NAS 6000 Administration Guide
Disk Drive Array Organization
In order to fully understand the operation and capabilities of the MaxAttach disk drive
array, the disks should be viewed in their logical, physical, SCSI, and RAID configurations,
each of which provides additional insight into the system capabilities.
Throughout this section, the emphasis is on the "factory default configuration." This refers
to the "as-shipped" configuration the Base Units in all systems, and, if equipped, the
recommended factory default configuration for Expansion Unit/s.
Chapter #4 - Overview - NAS 6000 Disk Array
11/07/01 -- Revision 2.0.03A
Chapter #4 - Overview - NAS 6000 Disk Array
118
Disk Drive Array Organization
000001628