Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
9.
Navigate to the share that has the new software.
10. Run the new program's Setup (or do whatever is required to install the new
program).
11. When the installation program is finished, you can remove the share that you created,
as it is no longer needed.
Automatic System Backup Schedule
By default, automatic system backup is scheduled for once each week, beginning at 2:00
AM on Saturdays. The backup copy can be used to recover from a boot failover. To
change this schedule or to disable automatic system backup, see Automatic System Backup
Schedule.
Changing the Automatic Backup Schedule
To change the automatic backup schedule
1.
Log in to the Maxtor MaxAttach NAS 6000 as administrator.
2.
Click Maintenance on the main menu bar.
3.
Select Terminal Services. A terminal services session starts.
4.
Log in to Windows 2000.
5.
On the Windows Start menu, select Settings > Control Panel. The control panel
displays.
6.
Double-click the Scheduled Tasks icon. This opens the scheduler.
7.
Right-click BackupMaxAttach6000.bat and select Properties.
8.
On the Schedule tab, enter the new schedule parameters
9.
Click OK.
Disabling the Automatic Backup Schedule
To disable the automatic backup schedule
1.
Log in to the MaxAttach NAS 6000 as administrator.
Chapter #10 - O/S 2.0 - Maintenance
11/07/01 -- Revision 2.0.03A
Automatic System Backup Schedule
236
Chapter #10 - O/S 2.0 - Maintenance
000001628
Advertisement
Table of Contents
