First Expansion Unit User Data Arrays; Drive G:\ And Drive H; Second Expansion Unit User Data Arrays - Maxtor NAS 6000 Administration Manual

MaxAttach NAS 6000 Administration Guide

First Expansion Unit User Data Arrays

The first Expansion Unit comes unconfigured from the factory.
n
At the end of the installation process, the drives are configured using the Mylex Global
n
Array Manager (GAM) software that comes with the MaxAttach NAS 6000.
The figure below shows the drives in the recommended default RAID 5 configuration.
n
Figure #8

Drive G:\ and Drive H:\

Drives G:\ and H:\ are available for user data. The recommended default configuration for
both drives RAID 5. The RAID 5 arrays for both or either drives can changed to other
RAID configurations.

Second Expansion Unit User Data Arrays

The configuration recommendations and options for the second Expansion Unit are
identical to those for the first Expansion Unit.
Chapter #4 - Overview - NAS 6000 Disk Array
11/07/01 -- Revision 2.0.03A
Expansion Unit One User Data Drive Arrays
Chapter #4 - Overview - NAS 6000 Disk Array
First Expansion Unit User Data Arrays
126
000001628